bird2.1

Hey guys,

Here is my long promised try at bird 2.1. I had to make more
change suggestions than I wanted to but it seems that this is
a good time to get this stuff out and discussed before we make
the new parser etc.

                 Buffer Issue Resolution Document (BIRD)

BIRD ID#: 2.1
ISSUE TITLE: Requiring VIH VIL thresholds for input devices
REQUESTOR: Jon Powell, Quad Desgin

DATE SUBMITTED: 10/4/93 rev 2.1 2/16/94
DATE ACCEPTED BY IBIS OPEN FORUM: {will be filled in when accepted}

*******************************************************************************
*******************************************************************************

STATEMENT OF THE ISSUE:

        The V1.1 IBIS specification does not require the presence of input
        thresholds on input devices. This allows data-generators to omit
        thresholds and still create "IBIS LEGAL" models. Input devices with
        no stated digital logic input thresholds would not allow for the calculation
        of digital pin-to-pin delays which is a very important quantity to many
        potential users. Requiring a low and high threshold
        for all input devices is therefor a reasonable requirement that adds
        information without creating undo restrictions.

*******************************************************************************

STATEMENT OF THE RESOLVED SPECIFICATIONS:

modify the [Model] statement to take into account different devices separate
from device technology.

Model_type Input Output I/O analog_load | list one only
Model_technology TTL CMOS ECL GAL OTHER | list one only
Model_structure Tri-state Open-Drain Open-Collector Normal | list one only

Devices of type Input and I/O would give a warning if Vih and Vil are not specified
and a default of .8 and 2.0 (low high respectively) would be generated.

*******************************************************************************

ANALYSIS PATH/DATA THAT LED TO SPECIFICATION:

        There are devices that are not Input or Outputs and are not handled by
        our current set of model types. For instance:

        Termination Resistor Packs
        Termination Diode Packs
        Descrete 2 port devices

*******************************************************************************

ANY OTHER BACKGROUND INFORMATION:

      {These documents will be archived, so use this section to carry any detail
       that is not essential to the previous section, but should not be lost.}

*******************************************************************************
Received on Wed Feb 16 16:17:47 1994