Re: Programmable Pads

Text item:

As far as I can remember we cannot do this currently in IBIS, other than making
a separate model for each value of the programming switch and then selecting the
desired model manually based on the value of the switch.

Arpad Muranyi
Intel Corporation

Is there any prescribed way to model programmable pads in Ibis.
     
Depending on the logic value of a switch, a programmable pad may have different
rise/fall times or drive strength.

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

Subject: Programmable Pads
To: ibis@vhdl.org
Message-Id: <9409291927.AA11157@karoshi.psdphx>
From: cheerl_r@karoshi.vlsi.com (Rakesh Cheerla)
Date: Thu, 29 Sep 94 12:27:23 MST
Received: from necropolis.psdphx by karoshi.psdphx (4.1/SMI-4.1)
        id AA11157; Thu, 29 Sep 94 12:27:23 MST
Reply-To: cheerl_r@karoshi.vlsi.com
Received: from karoshi.psdphx by vlsiphx (4.1/SMI-4.1/Perlotto-082294)
        id AA12998; Thu, 29 Sep 94 12:27:34 MST
Received: from vlsiphx by peanuts.vlsi.com (8.6.9/SMI4.1-UCB8.6.9/Perlotto-DeLon
        id MAA18906; Thu, 29 Sep 1994 12:28:21 -0700
Received: from peanuts.vlsi.com by vhdl.vhdl.org (4.1/SMI-4.1/BARRNet)
        id AA11251; Thu, 29 Sep 94 12:32:13 PDT
Received: from vhdl.vhdl.org by hermes.intel.com (5.65/10.0i); Thu, 29 Sep 94 12
Received: from hermes.intel.com by relay.jf.intel.com with smtp
        (Smail3.1.28.1 #2) id m0qqRJq-000twfC; Thu, 29 Sep 94 12:39 PDT
Received on Thu Sep 29 13:08:33 1994