Re: The '_' char vs. the ' ' char

Text item:

Scott,

In IBIS V2.0, under the section, "General syntax rules and guidelines for
ASCII IBIS files, guideline 7 says: "Underscores and spaces are equivalent in
keywords. Spaces are not allowed in sub-parameter names.

Regards,

Will Hobbs
Intel Corp.

One thing that I have noticed is the lack of the '_' character in the [POWER
Clamp] and [GND Clamp] keywords. They are in the 1.1 version spec, but not the
2.0. Has this been addressed? Should a parser recoginze both? Should it be
Version Specific?

Scott Aron Bloom
Interconnectix, Inc.

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

From: Scott Aron Bloom <scott@icx.com>
Date: Thu, 29 Sep 1994 15:32:35 -0700
Subject: The '_' char vs. the ' ' char
To: ibis@vhdl.org
Message-Id: <9409292232.AA07564@icx.com>
Received: from localhost.ARPA by icx.com (4.1/3.2.083191-Interconnectix Inc.)
        id AA07564; Thu, 29 Sep 94 15:32:36 PDT
Received: by uu4.psi.com (5.65b/4.0.071791-PSI/PSINet) via UUCP;
        id AA06655 for ; Thu, 29 Sep 94 18:52:25 -0400
Received: from uu4.psi.com by vhdl.vhdl.org (4.1/SMI-4.1/BARRNet)
        id AA12595; Thu, 29 Sep 94 16:00:03 PDT
Received: from vhdl.vhdl.org by hermes.intel.com (5.65/10.0i); Thu, 29 Sep 94 16
Received: from hermes by ichips.intel.com (5.64+/10.0i); Thu, 29 Sep 94 16:05:53
Received: from ichips.intel.com by relay.jf.intel.com with smtp
        (Smail3.1.28.1 #2) id m0qqUYw-000twhC; Thu, 29 Sep 94 16:06 PDT
Received on Thu Sep 29 16:29:54 1994