Re[5]: Rising Waveform Loading Effects: smart simulator

Text item:

Dileep,

IBIS allows you to define up to a maximum of 100 waveform tables (V-t curves) in
each buffer model. Each of these V-t tables have their own subparameters, such
as Rfixture, so you can make a model which provides a series of V-t curves for
the various loading conditions. Is that not enough for what you are trying to
achieve?

Arpad
================================================================================

Arpad Muranyi wrote about the simulator being smart enough
to fit an equation to the given data. The point I am trying
to make is that sufficient data need to be provided. For
example, a straight line is the simplest curve in two dimensions.
The equation of a straight line has two unknowns. Therefore,
at least two data points or two pieces of information are needed.
There are infinite ways of drawing a straight line thru a single
point. There is no unique way of defining a straight line in this
case no matter how smart the fitting method is. Thus, given only
one V-t waveform, it is not possible to predict many V-t waveforms
for all possible loading conditions.
------------------------------------------------------------
Dileep Divekar
Applied Simulation Technology, Inc.
2188 Bering Drive
San Jose, CA 95131

Phone - (408)-434-0967 x 100
Fax - (408)-434-1003
Email - dileep@apsimtech.com
------------------------------------------------------------

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

X-Sun-Charset: US-ASCII
Cc: dileep@contec.Apsimtech.COM
Subject: Re: Re[3]: Rising Waveform Loading Effects: smart simulator
To: ibis@vhdl.org
Message-Id: <9611012026.AA22832@contec13.contec.COM>
From: dileep@contec.Apsimtech.COM (Dileep Divekar)
Date: Fri, 1 Nov 1996 12:26:43 +0800
Received: by contec13.contec.COM (5.0/SMI-SVR4)
     id AA22832; Fri, 1 Nov 1996 12:26:43 +0800
Received: from contec13.contec.COM by Apsimtech.COM (4.1/SMI-4.1)
     id AA27374; Fri, 1 Nov 96 12:17:57 PST
Received: from contec.UUCP by netcomsv.netcom.com with UUCP (8.6.12/SMI-4.1)
     id MAA09723; Fri, 1 Nov 1996 12:25:34 -0800
Received: from netcomsv.netcom.com (uucp4.netcom.com [163.179.3.4]) by vhdl.vhdl
.org (8.7.3/8.7.3) with SMTP id MAA10182 for <ibis@vhdl.org>; Fri, 1 Nov 1996 12
:50:28 -0800 (PST)
Received: from vhdl.vhdl.org (vhdl.vhdl.org [198.31.14.3]) by ormail.intel.com (
8.7.6/8.7.3) with ESMTP id MAA25117; Fri, 1 Nov 1996 12:43:55 -0800 (PST)
Received: from ormail.intel.com (ormail.intel.com [134.134.248.3]) by relay.jf.i
ntel.com (8.7.4/8.7.3) with ESMTP id MAA16766; Fri, 1 Nov 1996 12:43:54 -0800 (P
ST)
Return-Path: owner-ibis@vhdl.vhdl.org
Received on Fri Nov 1 13:43:34 1996