Re: Need to validate the model....

Sukanya:

You can also send the model to mbflora@hyperlynx.com, and Matthew
will distribute it to 6 different vendors on the Model Review
Committee to test in their products and to give you feedback
on what it may need and on how well it works.

Best Regards,
Bob Ross
Interconnectix/Mentor Graphics

> Sukanya,

> You can go to the IBIS web page(www.eia.org/EIG/IBIS/ibis.htm)and
> look under 'Poster', all member EDA companies are listed there.
> I am sure they will help you out with checking out the model and
> simulating it for verification.

> You can also send the model to the IBIS Librarian(jon@qdt.com)to
> check it out and give you some feedbacks.

> Regards,
> Syed.
> National Semiconductor Corp.

> > From owner-ibis@server.vhdl.org Wed Apr 29 14:30:44 1998
> > Date: Wed, 29 Apr 1998 15:12:02 -0500
> > From: sukanya@india.sps.mot.com (Sukanya Rajagopal)
> > To: ibis@vhdl.org
> > Subject: Need to validate the model....
> > Cc: sukanya@india.sps.mot.com
> > Content-Type> : > text/plain> ; > charset=us-ascii>
> > Content-Transfer-Encoding: 7bit
> > Content-Md5: Q+xCBvVINGiXreNk1mLNdA==
> >
> > Hello!
> >
> > We have an IBIS model but do not have a simulator which can run IBIS. Is there a
> > way to validate the model without having to use a simulator which can run IBIS.
> > I would appreciate any information or pointers to some URLs.
> >
> > Thank you,
> > Sukanya Rajagopal.
> >
Received on Wed Apr 29 20:23:22 1998