Re: True or False?

Chris:

I vote for True.

Bob Ross
Interconnectix/Mentor Graphics

> Date: Wed, 07 Oct 1998 16:15:07 -0700
> From: Chris Rokusek <crokusek@viewlogic.com>
> To: ibis@eda.org
> Subject: True or False?

> Ibisians,

> I have a Quiz, True or False:

> The models of pins referenced by a [Diff Pin] keyword may NOT be of any
> of the following:

> Terminator,
> Series,
> Series_switch.

> Chris

> I think the spec implicitly says TRUE...

> |=============================================================================
> | Keyword: [Diff Pin]
> | Required: No
> | Description: Associates differential pins, their differential
> threshold
> | voltages, and differential timing delays.
> | Sub-Params: inv_pin, vdiff, tdelay_typ, tdelay_min, tdelay_max
> | Usage Rules: Enter only differential pin pairs. The first column,
> [Diff
> | Pin], contains a non-inverting pin name. The second
> column,
> | inv_pin, contains the corresponding inverting pin name
> for
> | I/O output. Each pin name must match the pin names
> declared
> | previously in the [Pin] section of the IBIS file. The
> third
> | column, vdiff, contains the specified output and
> differential
> | threshold voltage between pins if the pins are Input or
> I/O
> | model types. For output only differential pins, the
> vdiff
> | entry is 0 V. The fourth, fifth, and sixth columns,
> | tdelay_typ, tdelay_min, and tdelay_max, contain launch
> delays
> | of the non-inverting pins relative to the inverting
> pins. The
> | values can be of either polarity.
> |
> | If a pin is a differential input pin, the differential
> input
> | threshold (vdiff) overrides and supersedes the need for
> Vinh
> | and Vinl.
> |
> | If vdiff is not defined for a pin that is defined as
> requiring
> | a Vinh by its [Model] type, vdiff is set to the default
> value
> | of 200 mV.
> |
> | Other Notes: The output pin polarity specification in the table
> overrides
> | the [Model] Polarity specification such that the pin in
> the
> | [Diff Pin] column is Non-Inverting and the pin in the
> inv_pin
> | column is Inverting. This convention enables one
> [Model] to
> | be used for both pins.
> |
> | Column length limits are:
> | [Diff Pin] 5 characters max
> | inv_pin 5 characters max
> | vdiff 9 characters max
> | tdelay_typ 9 characters max
> | tdelay_min 9 characters max
> | tdelay_max 9 characters max
> |
> | Each line must contain either four or six columns. If
> "NA" is
> | entered in the vdiff, tdelay_typ, or tdelay_min columns,
> its
> | entry is interpreted as 0 V or 0 ns. If "NA" appears in
> the
> | tdelay_max column, its value is interpreted as the
> tdelay_typ
> | value. When using six columns, the headers tdelay_min
> and
> | tdelay_max must be listed. Entries for the tdelay_min
> column
> | are based on minimum magnitudes; and tdelay_max column,
> | maximum magnitudes. One entry of vdiff, regardless of
> its
> | polarity, is used for difference magnitudes.
> |-----------------------------------------------------------------------------
> [Diff Pin] inv_pin vdiff tdelay_typ tdelay_min tdelay_max
> |
> 3 4 150mV -1ns 0ns -2ns | Input or I/O
> pair
> 7 8 0V 1ns NA NA | Output* pin
> pair
> 9 10 NA NA NA NA | Output* pin
> pair
> 16 15 200mV 1ns | Input or I/O pin pair
> 20 19 0V NA | Output* pin pair, tdelay = 0
> 22 21 NA NA | Output*, tdelay = 0
> | * Could be Input or I/O with
> vdiff = 0
> |
> |======================================================================
Received on Wed Oct 7 18:08:02 1998