Norbert:
IBIS Version 3.1 contains the [Series Current] keyword
which is designed for modeling non-linear series elements
such as series diodes. Since [Series Current] is a series
element, the [Series Pin Mapping] keyword can be used to
assign pins to it with the correct polarity.
Best Regards,
Bob Ross
Interconnectix/Mentor Graphics
> Date: Wed, 09 Sep 1998 12:45:26 +0200
> To: ibis@vhdl.org
> From: Norbert Wellnitz <norbert_wellnitz>
> Subject: Serial Diodes
> Hi all,
> is there any idea how to model seriel diodes ( no terminator ) and to get
> them in with the
> correct polarity ?
> Any idea is welcome.
> Mit freundlichem Gruss
> Norbert Wellnitz
> Mit freundlichem Gruss
> Norbert Wellnitz
> =========================================
> Mentor Graphics (Deutschland) GmbH
> Education & Training Department
> Tel. +49 (0) 89 57096-0
> Fax +49 (0) 89 57096-455
> e-mail: norbert_wellnitz@mentorg.com
> =========================================
> +++++++++++++++++++++++++++++++++++++++++
> Have a look on http://www.mentorg.com/germany/training
> +++++++++++++++++++++++++++++++++++++++++
Received on Wed Sep 9 08:28:44 1998
This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:52:30 PDT