IBIS BIRD64.3 - Alternate Package Models

To All:

In response to some comments at the October 27, 2000 IBIS Meeting
BIRD64.3 is Issued. The title has been changed from Package
Model Selector to Alternate Package Models.

Discussion on BIRD64.3 can be done on the IBIS reflector.

Bob Ross
Mentor Graphics

*******************************************************************************
*******************************************************************************

BIRD ID#: 64.3
ISSUE TITLE: Alternate Package Models
REQUESTER: Arpad Muranyi, Intel; Mike LaBonte, Cadence
DATE SUBMITTED: 10-25-99, 11-19-99, 10-8-2000, 11-1-2000
DATE ACCEPTED BY IBIS OPEN FORUM: Pending

******************************************************************************
******************************************************************************

STATEMENT OF THE ISSUE:

The current IBIS specification (3.2) does not provide a selection mechanism
for multiple package models. This may be necessary when a certain die is
shipped in various package styles, or when the corner cases of the package
are described with different package models.

This BIRD is written to provide an easy solution to this deficiency. This
feature will allow simulator tools to implement a user friendly package
model selection interface and/or better automation for batch and sweep
simulations.

******************************************************************************

STATEMENT OF THE RESOLVED SPECIFICATIONS:

A new keyword shall be introduced in the IBIS specification to provide a user
friendly package model selection mechanism for components which use multiple
package models. The proposed keyword [Alternate Package Models] shall contain
a list of package model names that the simulator can pick from, in addition to
the default package model name given by the [Package Model] keyword. The
package model names listed under the [Alternate Package Models] must follow
the rules of the package model names associated with the [Package Model]
keyword.

To help the user of the simulator tool to make an intelligent choice, it is
highly recommended that a description be placed to the right of each package
model name in the list as a comment.

|=============================================================================
| Keyword: [Alternate Package Models] [End Alternate Package Models]
| Required: No.
| Description: Used to select a package model from a list of package models.
| Sub-Params: None.
| Usage Rules: The [Alternate Package Models] keyword can be used in addition
| to the [Package Model] keyword. [Alternate Package Models]
| may be used only for components that use the [Package Model]
| keyword.
|
| Each [Alternate Package Models] keyword specifies a set of
| alternate package model names for only one component, which
| is given by the previous [Component] keyword. The [Alternate
| Package Models] keyword may not appear before the first
| [Component] keyword in an IBIS file. The [Alternate Package
| Models] keyword, when used, must follow the [Package Model]
| keyword within the same [Component] section, and must be
| followed by an [End Alternate Package Models] keyword..
|
| All alternate package model names must appear below the
| [Alternate Package Models] keyword, and above the following
| [End Alternate Package Models] keyword. The package model names
| listed under the [Alternate Package Models] must follow the
| rules of the package model names associated with the
| [Package Model] keyword. The package model names correspond
| to the names of package models defined by [Define Package
| Model] keywords. Simulation tools may offer users a facility
| for choosing between the default package model and any of the
| alternate package models, when analyzing occurances of the
| [Component].
|=============================================================================
|
[Alternate Package Models]
|
208-pin_plastic_PQFP_package-even_mode | What more can be said here?
208-pin_plastic_PQFP_package-odd_mode | It's all in the name.
208-pin_ceramic_PQFP_package-even_mode | More comments and descriptions here.
208-pin_ceramic_PQFP_package-odd_mode | And some more here too.
[End Alternate Package Models]
|
******************************************************************************

ANALYSIS PATH/DATA THAT LED TO SPECIFICATION:

Problem statement

Some components are shipped in multiple package styles. Also, there are
situations when the corner cases of a package are modeled with multiple
package models. Currently, in these cases the user of the IBIS model has to
manually edit the IBIS file to change the package model name that is called by
the [Package Model] keyword in order to reference a different package model.
This makes automated simulations difficult, if not impossible.

Possible solutions

Add a new, simple keyword to the IBIS specification which works similar to the
already existing [Model Selector] keyword. This was proposed in the original
BIRD.

Add a secondary keyword to list package models that are alternates to the
default package model given by [Package Model]. This is the currently
proposed solution.

******************************************************************************

ANY OTHER BACKGROUND INFORMATION:

Several IBIS model users expressed their desire in private conversations and
IBIS meetings to have such a package model selection mechanism in the IBIS
specification to make their work easier.

An alternate syntax was suggested by Bob Ross during an EMAIL and telephone
correspondence on 10/25/99. The suggested syntax is identical to the [Model
Selector] syntax, according to which the [Package Model Selector] would be
assigned a name that is called by the (higher level) [Package Model] keyword.
However, unlike in the [Model Selector] case, there is no need for calling the
[Package Model Selector] from a higher level. This BIRD favors the simpler
vs. the more consistent approach.

Scott McMorrow made a request in an EMAIL on 11/12/99 to incorporate typ.,
min., and max. columns in the list of package models under the model selector
name to assist in automating the package model selection based on corner
cases. According to the existing rules this is not possible, because the
package model names are allowed to be up to 40 characters in length. Three
package model names on the same line could add up to 122 characters, which
violates the current 80 character per line rules of the IBIS specification.

Further, package model names are allowed to include blank characters, which
requires a delimiter other than the space or tab character between the
typ., min., and max. columns. The usage of a new delimiter introduces another
inconsistency in the IBIS specification, since spaces and/or tab characters
are widely used as delimiters between columns in current IBIS versions.

A technical dilemma regarding the automated selection of package models based
on typ., min., and max. qualifiers remains to be answered also. What do typ.,
min., and max. represent? Impedance, wave velocity, trace length, or perhaps
the amount of cross talk? Simulation tool users will most likely make their
choices based on individual preferences, possibly depending on project
requirements. For this reason it seems to make more sense to give only a list
that contains all of the package models without the typ., min., and max.
qualifiers. The selection and automated usage of the various package models
should then be done through a GUI or configuration mechanisms provided by the
tool.

The differences between the model name and package model name restrictions
required a change even in this BIRD. The description field of the [Model
Selector] keyword is separated by one or more space or tab character(s) from
the model name. However, since package model names can contain blank
characters, space or tab characters will not work as delimiters for the
description field of the [Alternate Package Models] keyword.

Since the contents of the description field is only used for informational
purposes which does not effect the simulations I decided to use the comment
character (|) as the delimiter for now. This option was actually discussed
for the [Model Selector] also but voted down for the reason that tools reading
an IBIS model have all the rights to ignore all comments, therefore a GUI
would not know how to distinguish between a legitimate description and a
meaningless comment. Does anyone have a better suggestion?

Revision 64.2 changes 10-8-2000, Mike LaBonte:

Added scoping requirements and mutually exclusive relationship with [Package
Model]. Changed wording "... allows multiple package models to be listed" to
"... allows multiple models to be listed for a package". The new phrasing
implies that [Alternate Package Models] should be used to specify multiple
models for one package, not models for multiple packages. It might be
inappropriate to place package models with different pin assignments,
thermal characteristics, etc. on a [Alternate Package Models] list, since
these variations would normally require changes to other elements of the
component model.

Revision 64.3 changes 10-31-2000, Mike LaBonte:

At the 10-27-2000 IBIS forum meeting it was pointed out that the original
[Package Model Selector] keyword proposal was inconsistent in usage with the
[Model Selector] keyword. A key point is that each [Model Selector] has a
name that can be referred to in the [Pin] section as if it were the name of a
[Model]. The [Package Model Selector] keyword, as proposed, had no name.
This was ponted out earlier by Bob Ross. The [Alternate Package Models]
proposal avoids the use of a named selector, and retains the usefulness of the
existing [Package Model] keyword. At this time an [End Alternate Package
Models] keyword is introduced, to reduce potential parsing ambiguity for the
list of alternate package model names.

Along with this change the title of the BIRD changes from "Package Model
Selector" to "Alternate Package Models". A usage note explaining that
the name values in the list refer to [Define Package Model] names is also
added.

******************************************************************************
 
Received on Wed Nov 1 10:17:11 2000