RE: Case sensitivity?

Euruka! You are absolutely right.

You know that this brings up my favorite comment, right? Which, for the
uninitiated, can be found at:

http://www.cafepress.com/kumar_right

Thanks for the feedback.

Todd ;-)

Todd Westerhoff
SI Engineer
Hammerhead Networks
5 Federal Street
Billerica, MA 01821
twester@hhnetwk.com
ph: 978-671-5084

-----Original Message-----
From: Beal, Weston [mailto:weston_beal@mentorg.com]
Sent: Wednesday, July 18, 2001 5:33 PM
To: 'ibis@eda.org'
Subject: RE: Case sensitivity?

Todd,

This is a small problem of semantics. Keywords are case-INsensitive, but
keywords are also enclosed in square brackets, []. These words you cited
are not in square brackets so they are considered subparameters instead of
keywords. Now the rules change. Isn't this fun? :)

Later,
Weston

-----Original Message-----
From: Todd Westerhoff [mailto:twester@hhnetwk.com]
Sent: Wednesday, July 18, 2001 12:42 PM
To: ibis@eda.org
Subject: Case sensitivity?

Hi all,

I'm using IBISCHK V3.2.5 and have noticed that the handling of the keywords

Si_location
Timing_location

seems to be case sensitive, although the IBIS Spec says that keywords are
supposed to be case-insensitive. Anyone else seen the same thing?

Todd.

Todd Westerhoff
SI Engineer
Hammerhead Networks
5 Federal Street
Billerica, MA 01821
twester@hhnetwk.com
ph: 978-671-5084

 
Received on Wed Jul 18 15:50:31 2001