Subject: Re: Pin Mapping in IBIS models
From: LiuWeidong (liuweidong@huawei.com)
Date: Tue Jul 31 2001 - 17:48:34 PDT
Please see the file attached. I hope this helps you
----- Original Message -----
From: Raj Raghuram <raghu@sigrity.com>
To: <ibis@eda.org>; <ibis_users@eda.org>
Sent: Wednesday, August 01, 2001 12:26 AM
Subject: Pin Mapping in IBIS models
> The Pin Mapping section (optional) in IBIS 2.1 was introduced to associate
> drivers with appropriate Power and Ground pins for simulation of ground and
> power bounce. However, I am not able to locate any IBIS models which have
> this section.
>
> Can anybody point me to an IBIS model containing this section?
>
> Raj Raghuram
> Sigrity, Inc.
> "Achieve what others can't"
> raghu@sigrity.com
> http://www.sigrity.com
> 4675 Stevens Creek Blvd. , Ste 130
> Santa Clara, CA-95051
> PH: 408-260-9344 x116
> CELL: 408-390-9614
> FAX: 408-260-9342
>
This archive was generated by hypermail 2b28 : Tue Jul 31 2001 - 17:47:36 PDT