Subject: Re: IBISCHK3 bug report
From: Jim Bell (jim@siqual.com)
Date: Thu Oct 11 2001 - 17:35:02 PDT
Bob,
No need to go any further. The bug has been fixed in Version 3.2.7.
Thank you for looking at this.
- Jim
At 03:47 PM 10/11/2001 -0700, Ross, Bob wrote:
>Jim:
>
>I looked at the example sent privately and also noted that
>you used ibischk3 Version 3.2.5.
>
>The ERROR did not appear in ibischk3 Version 3.2.7. It may
>have gone away because of resolving some other problem. In
>fact, I am not sure how I could reproduce this "Error" under
>the current parser.
>
>Your file still has a number of serious problems even though
>it now passes the parser. These problems would need to be
>isolated with specific examples.
>
>Bob Ross
>Mentor Graphics
>
>
>Jim Bell wrote:
> >
> > PLATFORM: PC
> >
> > OS AND VERSION: Windows 2000 Version 5.0
> >
> > REPORTED BY: James C. Bell, SiQual Inc.
> >
> > DATE: 10/10/01
> >
> > DESCRIPTION OF BUG:
> >
> > The IBISCHK3 message
> >
> > "ERROR - Component '%1': [Series Pin Mapping] Pin2 '%a': model type
> cannot be Series or Series_switch."
> >
> > should be
> >
> > "...model name cannot be Series or Series_switch."
> >
> > INSERT IBIS FILE DEMONSTRATING THE BUG:
> >
> > Not necessary.
> >
> > ===
> > Jim Bell
> > SiQual, A division of Stilwell Baker
> > jim@siqual.com
> > phone (503)885-1231
> > fax (503)885-0550
> > http://www.siqual.com/ <http://www.siqual.com/>
===
Jim Bell
SiQual, A division of Stilwell Baker
jim@siqual.com
phone (503)885-1231
fax (503)885-0550
http://www.siqual.com/
This archive was generated by hypermail 2b28 : Thu Oct 11 2001 - 17:54:59 PDT