Re: PSpice 2 IBIS

Subject: Re: PSpice 2 IBIS
From: Bob Ross (bob_ross@mentorg.com)
Date: Tue Oct 30 2001 - 11:43:14 PST

• Next message: Bob Ross: "IBIS - ICEM Documents for EMC Macromodeling"
• Previous message: Guy de Burgh: "EIA IBIS Open Forum Meeting Minutes"
• In reply to: Erik Johnson: "PSpice 2 IBIS"
• Next in thread: Scott McMorrow: "Re: PSpice 2 IBIS"
• Reply: Bob Ross: "Re: PSpice 2 IBIS"
• Reply: Scott McMorrow: "Re: PSpice 2 IBIS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Erik:

The following utility may work under Windows 98 and may support PSpice.

  http://www.eda.org/pub/ibis/s2ibis/s2ibis2_nt/

Bob Ross
Mentor graphics

Erik Johnson wrote:
>
> I am looking for a windows (98) based translator from microsim/ORCAD/Cadence
> PSpice to IBIS.
>
> -erik

• Next message: Bob Ross: "IBIS - ICEM Documents for EMC Macromodeling"
• Previous message: Guy de Burgh: "EIA IBIS Open Forum Meeting Minutes"
• In reply to: Erik Johnson: "PSpice 2 IBIS"
• Next in thread: Scott McMorrow: "Re: PSpice 2 IBIS"
• Reply: Bob Ross: "Re: PSpice 2 IBIS"
• Reply: Scott McMorrow: "Re: PSpice 2 IBIS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Tue Oct 30 2001 - 12:31:23 PST