Subject: Re: [IBIS] Bird 74
From: Pravin Patel (pravinp@us.ibm.com)
Date: Thu Mar 21 2002 - 19:51:03 PST
Guy,
Heatsink parameter is dependent on the form factor of your box
design. It can very by box to box dependent on how the airflow define in
the box. So If vendor provide the data may not be correct for your
application.
Heatsink 15.0mm 15.0mm 12.0mm
Pravin Patel
3039 Cornwallis Road
RTP, NC 27709
Email: pravinp@us.ibm.com
Phone: 919-543-3837
Guy deBurgh
<gdeburgh@innoved To: ibis@eda.org
a.com> cc:
Sent by: Subject: [IBIS] Bird 74
owner-ibis@eda.or
g
03/19/2002 06:54
PM
Attached is Bird 74 "EMI Parameters for IBIS"
#### BIRD74.txt has been removed from this note on March 21 2002 by Pravin
Patel
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Mar 21 2002 - 20:09:40 PST