[IBIS] DC and AC data mismatch error in IBIS
Subject: [IBIS] DC and AC data mismatch error in IBIS
From: Haque, Moshiul (mhaque@ti.com)
Date: Mon Oct 21 2002 - 13:47:20 PDT
Hello All,
I am getting end point errors while running the IBISCHK 3.2.8 parser but no
end point warning or error if I check it with the 3.2.9. I am trying to find
out if this was a bug in the older version or is this something I need to
worry about.
Regards
Moshiul Haque
Standard Linear and Logic Marketing
Texas Instruments Incorporated
Ph: (903) 868-7153
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28
: Mon Oct 21 2002 - 13:57:02 PDT