IBIS - EIA IBIS Open Forum Activity: RE: [IBIS] ibischk [Series

From: Mirmak, Michael <michael.mirmak@intel.com>
Date: Tue Aug 10 2004 - 13:06:52 PDT

Mike,

Do you have [Series Switch Groups] defined for the same model? Ibischk4 is probably looking for the table group definitions there.

- Michael Mirmak
Intel Corp.
Chair, EIA IBIS Open Forum

-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mike LaBonte
Sent: Tuesday, August 10, 2004 11:44 AM
To: ibis@eda.org
Subject: [IBIS] ibischk [Series Pin Mapping] error

Can someone explain why ibischk4 looks at this IBIS table:

[Series Pin Mapping] pin_2 model_name function_table_group
3 2 SWITCH1 1
6 5 SWITCH1 1

and complains:

ERROR - Component 'MYCOMPONENT': [Series Pin Mapping] Model 'SWITCH1' uses
function 1 which is not defined.
ERROR - Component 'MYCOMPONENT': [Series Pin Mapping] Model 'SWITCH1' uses
function 1 which is not defined.

As far as I can tell IBIS does not require names in the function_table_group
column to be "defined" anywhere else.

Mike LaBonte

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

This archive was generated by hypermail 2.1.8 : Tue Aug 10 2004 - 13:09:11 PDT

RE: [IBIS] ibischk [Series Pin Mapping] error