Re: [IBIS] Question regarding V-t tables

From: Bob Ross <bob@teraspeed.com>
Date: Wed Sep 08 2004 - 17:30:10 PDT

Arpad:

I would expect some EDA tools to reject V-T tables with the
same R_fixture/V_fixture values because of processing equation
singularities. To avoid some EDA tool dependencies (both positive
and negative), the best approach is to use [Model Selector] to set
up different data pattern situation of interest.

Bob

Muranyi, Arpad wrote:

> All,
>
> I just realized something regarding the V-t tables in IBIS that raises
> a question in my mind.
>
> The spec says that we can have up to 100 V-t tables. It doesn't say
> anything on how Vfixture and Rfixture should be selected for these to
> make a good model.
>
> Many simulators can only support the first four tables, but I am aware
> of some which can make use of all of them. As far as I know, the
> algorithms which make use of all of them assume that the additional
> tables generated with the various Rfixture and Vfixture values provide
> a better understanding for how the buffer reacts to various loading
> conditions.
>
> What I would like to find out is this: What would happen if an IBIS
> file had multiple V-t tables with repeated Rfixture and Vfixture
> parameters, but different waveform shapes? (This ***CAN*** happen
> nowadays with advanced buffers which exhibit data pattern dependent
> behaviors). Obviously, given the current spec, the tool wouldn't
> know when to use which table. Would this be a good reason to write
> another BIRD for some additional subparameters for the V-t tables?
>
> Arpad

-- 
Bob Ross
Teraspeed Consulting Group LLC     Teraspeed Labs
121 North River Drive              13610 SW Harness Lane
Narragansett, RI 02882             Beaverton, OR 97008
503-750-6481                       503-430-1065
http://www.teraspeed.com           503-246-8048 Direct
bob@teraspeed.com
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Wed Sep 8 17:26:52 2004

This archive was generated by hypermail 2.1.8 : Wed Sep 08 2004 - 17:27:16 PDT