RE: [IBIS] queries regarding ibis

From: Muranyi, Arpad <arpad.muranyi@intel.com>
Date: Thu Jan 06 2005 - 12:35:35 PST

Arnab,
 
What do you mean by "for 2 power supplies"? A single I/O
connected to 2 different voltages, or the same I/O buffer
being used once at one voltage and another time at another
supply voltage?
 
If it is the latter, you can use the [Model Selector] keyword
with multiple [Model]s each of which are made with a different
voltage.
 
If it is the former, than I wonder how that buffer works,
because I can't see how, for example, a pullup could pull
to two different voltages...
 
However, please note that each IV table has their own reference
voltage keywords, which allows you to connect them to different
voltages. An example for this would be a 5 volt safe 3.3 volt PCI
buffer where the pullup uses 3.3 V and the power clam uses 5 v.
 
I hope this helps.
 
Arpad Muranyi
Intel Corporation
===============================================================

________________________________

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of arnab
Sent: Thursday, January 06, 2005 10:40 AM
To: ibis@eda.org
Cc: ibis-users@eda.org
Subject: [IBIS] queries regarding ibis

Hi all,
 
I have some doubts regarding generation of ibis models
 
1.Is it possible to generate IO model for 2 power supplies?If yes then how do we go about it?

2. Can we have the ibis models generated for a high drive as well as low drive for the i/o buffers.Presently we keep the drive low and generate the models.

Any help in this regard would be appreciated.Thanking in advance.
 
warm regards
arnab hazarika

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Thu Jan 6 12:44:49 2005

This archive was generated by hypermail 2.1.8 : Thu Jan 06 2005 - 12:47:40 PST