Hi Arnab ,
One way to get about this problem is to cross check the Tr, Tf for that
particular IO buffer.
You can also increse the simulation time. Here 2.5ns is very less. Try
increasing it to about 10ns and check the results.
If this does not work, try with the [Tr] and [Tf].
Thanks ,
Vivek
"Arnab Hazarika"
<arnab@qualcomm.c To: ibis@eda.org
om> cc: ibis-users@eda.org
Sent by: Subject: [IBIS] query regarding ramp functions
owner-ibis@eda.or
g
01/21/05 08:36 AM
Hi all ,
I have doubt regarding the ramp down and ramp up functions.
While creating the .s2i i have set the simulation time to be 2.5ns.
The pulse signal thereby generated by s2ibis in rdn.spi is
PULSE(2.5 0 0 2.5e-11 2.5e-11 5e-09 1.01e-08)
.TRAN 2.5e-11 2.5e-09
However if i carry ahead with pulse and transient statement then for the other
ramp functions then in the final ibis file i get
Ramp]
| variable typ min max
dV/dt_r 0.61/0.13n 8.892e-21/-0.58n 0.82/89.36p
Now dT must be greater than 0 in a Ramp specification and thereby winibis flags
off an error.
So I needed to know how i go about this problem.
Looking forward for your comments.
Thanking you.
warm regards
arnab hazarika
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Fri Jan 21 00:14:11 2005
This archive was generated by hypermail 2.1.8 : Fri Jan 21 2005 - 00:16:05 PST