RE: [IBIS] PB-FREE IBIS MODEL

Michel,

Thanks for your question. Lead-free parts should not require any
unusual modeling under IBIS, at least as far as the details of I-V
tables, V-T tables or C_comp are concerned. There is certainly no
keyword or subparameter in IBIS which would be used to designate a
lead-free part.

The only difference between particular "leaded" and lead-free parts
might be in the individual values of package parasitics (i.e., R_pin,
C_pkg or package matrix data, etc.) used in each specific case.

I hope this helps!

- Michael Mirmak
  Intel Corp.
  Chair, EIA IBIS Open Forum

-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Michel
Perez
Sent: Monday, February 07, 2005 10:24 PM
To: 'ibis@eda.org'
Subject: [IBIS] PB-FREE IBIS MODEL

Hi

 What are the changes and the differences between the "standard" IBIS
Model and the PB-FREE Model ?

 Thank You

Michel Perez

Creo

-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Mon Feb 7 22:58:05 2005