RE: [IBIS] *-AMS modeling and hurting companies?

We talk of HSPICE as if it is a non-commercial tool. If we make the
HSPICE EFGH elements available within IBIS, what about:

PSPICE
RSPICE
NSPICE
KSPICE
QSPICE
..
..
(add more as you see fit)

- Syed

On Mon, 2005-04-04 at 14:45, Muranyi, Arpad wrote:
> Lynne,
> 
> Don't proposal for macromodeling is without the [External Circuit]
> as far as I understand.  He was suggesting to make the HSPICE EFGH
> elements (or equivalents) available as part of the legacy IBIS spec,
> so that the good old IBIS 2.1 IV/Vt curve engine could be ornamented
> by it.
> 
> C/C++ ?!?!?  You didn't have enough of the AMS discussion yet?   :-)
> 
> Arpad
> ====================================================================
> 
> -----Original Message-----
> From: lgreen [mailto:lgreen22@mindspring.com] 
> Sent: Monday, April 04, 2005 2:36 PM
> To: Muranyi, Arpad; 'ibis'
> Subject: RE: [IBIS] *-AMS modeling and hurting companies?
> 
> Arpad at al,
> 
> 1) At least one person replied that they were using IBIS 4.1 AMS modeling,
> as supported by their EDA vendor. Others are ramping up this year.  My
> thanks to those who took time to reply.
> 2) It sounds like the good news is that IBIS is most of the way to the
> requested macromodeling. :-)
> 3) Why stop there, since HSPICE does not have some of the equations one
> might want to use?  Could it be expanded to support any C/C++ equation to
> make it more general purpose?
> 4) My embarrassment, since I have missed the last few Futures meetings.
> 
> Best regards,
> Lynne
> 
> -----------------------------------------------------------------
> |For help or to subscribe/unsubscribe, email majordomo@eda.org
> |with the appropriate command message(s) in the body:
> |
> |  help
> |  subscribe   ibis       <optional e-mail address, if different>
> |  subscribe   ibis-users <optional e-mail address, if different>
> |  unsubscribe ibis       <optional e-mail address, if different>
> |  unsubscribe ibis-users <optional e-mail address, if different>
> |
> |or email a request to ibis-request@eda.org.
> |
> |IBIS reflector archives exist under:
> |
> |  http://www.eda.org/pub/ibis/email_archive/  Recent
> |  http://www.eda.org/pub/ibis/users_archive/  Recent
> |  http://www.eda.org/pub/ibis/email/          E-mail since 1993
-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993