RE: [IBIS-Users] RE: [IBIS] Why IO buffer name is limited to a max of 20 characters

From: Ummalaneni, Venu Babu \(Venu\) <venubabu_at_.....>
Date: Wed Jan 04 2006 - 02:43:26 PST
Arpad,

 

Thanks for your message and the pointer. Could you please tell me
when/how this BIRD93.1 will come for voting?

 

Best Regards,

Venu

 

 

-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of
Muranyi, Arpad
Sent: Tuesday, January 03, 2006 11:31 PM
To: ibis-users@eda.org; ibis@eda.org
Subject: RE: [IBIS-Users] RE: [IBIS] Why IO buffer name is limited to a
max of 20 characters

 

Sorry, the BIRD has already been written by Michael Mirmak

it is BIRD93.1

 

http://www.vhdl.org/pub/ibis/birds/bird93.1.txt

 

Arpad

============================================================

 

 

  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Muranyi, Arpad
Sent: Tuesday, January 03, 2006 9:34 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] RE: [IBIS] Why IO buffer name is limited to a max
of 20 characters

Venu,

 

This is rooted in the earlier versions of the spec when

the line length was limited to 80 characters, and therefore

we had limited space for each field on the lines of the

[Pin] section.  Now that the line length limit is 120

characters (if I am not mistaken), we could allow for 

longer model names, but someone would need to write a

BIRD for it.  Do you want to volunteer?

 

Arpad

============================================================

 

  _____  

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of
Ummalaneni, Venu Babu (Venu)
Sent: Thursday, December 22, 2005 5:47 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS] Why IO buffer name is limited to a max of 20 characters

Hi All,

 

Is there any specific reason exist to restrict the IO buffer name to a
maximum of 20 chars in our IBIS standard? Can't we change this rule to
allow more than 20 chars as buffer name? 

 

Recently, I experienced some IO buffers which have more than 20 chars in
their names. So, I have to truncate the IBIS model name to support this
rule. If choice is given I do not want to truncate the IBIS model name. 

 

Thanks in advance,

 

Best Regards,

Venu

 


-----------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Wed Jan 4 02:44:22 2006

This archive was generated by hypermail 2.1.8 : Wed Jan 04 2006 - 02:46:35 PST