[IBIS] about the keyword [frequency] of ICM 1.1

Hi Expert,

   I found for frequency dependent Matrix where [Frequency] is omitted
only in [Resistance Matrix](like Matrix Example in IIRD2.3), ICMCHK1
will report bellow error.

   ERROR:'[Resistance Matrix]' does not have the same number of
frequencies as '[Inductance Matrix]'

   

      ICM1.1 spec. tell us that "If a matrix keyword, such as
[Resistance Matrix] etc., is used

in combination with one or more [Frequency] keyword data sets, all other
matrix keywords, if present and consisting of non-zero
frequency-dependent data, must contain [Frequency] data sets at the same
frequency points."

 

   So is it a bug? 

   Thanks for any input!

 

Best regards

Xuefeng


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993