Hi Cary, Thanks for the inputs. Indeed the cell has on - die termination. I will come back to you if i have any questions. Thanks! Best Regards, Sudarshan HN NXP Semiconductors/CTO /PLT C-4, Manyata Tech Park, Nagawara Bangalore-560 045 , India. Ph:+91-80-40267073 Fax: +91-80-4026 7855 seri:sudarsha@inpsblr E-mail: sudarshan.honnudike@nxp.com "Mandel, Cary" <cary_mandel@mentor.com> Sent by: owner-ibis@server.eda.org 2007-03-14 05:05 PM To "Sudarshan Honnudike" <sudarshan.honnudike@nxp.com> <ibis@server.eda.org> <ibis-users@server.eda.org> cc Subject RE: [IBIS] Warning in LVDS Clamp data Classification Hello Sudarshan, The 3rd warning means that, a clamp is allowing as much as 1/3 amp of current to flow, while the voltage is still within the voltage rails. This is probably not what you intended, unless, you are incorporating the electrical charactersitics of an on-die-terminator into the clamps. If you would like to discuss this further, I suggest you contact Mentor directly - you can email me if you like. Cary Mandel Mentor Graphics From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Sudarshan Honnudike Sent: 14 March 2007 11:11 To: ibis@server.eda.org; ibis-users@server.eda.org Subject: [IBIS] Warning in LVDS Clamp data Hi IBIS Experts, One of my customer is getting the following warning in ICX parser. ;; ;; Warning: Current (0.306459) of summed typical power and ground clamp curves exceed 0.005 amps in the range between power and ground. ;; ;; Warning: Current (0.274468) of summed minimum power and ground clamp curves exceed 0.005 amps in the range between power and ground. ;; ;; Warning: Current (0.336667) of summed maximum power and ground clamp curves exceed 0.005 amps in the range between power and ground. While running ibischk4 I didnt get this warning. These warnings i am getting for LVDS input cell. Please also let me know what this warning means. Best Regards, Sudarshan HN NXP Semiconductors/CTO /PLT C-4, Manyata Tech Park, Nagawara Bangalore-560 045 , India. Ph:+91-80-40267073 Fax: +91-80-4026 7855 seri:sudarsha@inpsblr E-mail: sudarshan.honnudike@nxp.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Wed Mar 14 07:06:13 2007
This archive was generated by hypermail 2.1.8 : Wed Mar 14 2007 - 07:06:57 PDT