[IBIS] Rfixture value

From: Sudarshan Honnudike <sudarshan.honnudike_at_.....>
Date: Thu Apr 12 2007 - 05:24:44 PDT
Hello Experts,

One of my IO buffer is very slow and i need to increase R_fixture to 
considerably high value to
make the V-t curves attains steady state. I actually increased to 
10k(10,000). 

Will this have any major effect during SI simulations or is it ok to have 
this big load also.? 


Best Regards,

Sudarshan HN
NXP Semiconductors/CTO /PLT
C-4, Manyata Tech Park, Nagawara
Bangalore-560 045 , India. 
Ph:+91-80-40247073 
Fax: +91-80-4026 7855
seri:sudarsha@inpsblr
E-mail: sudarshan.honnudike@nxp.com
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Apr 12 05:23:30 2007

This archive was generated by hypermail 2.1.8 : Thu Apr 12 2007 - 05:25:12 PDT