Hello Anguraj, thanx for this info. I will check this. Regards Akhilesh -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Anguraj K Sent: Tuesday, May 15, 2007 2:55 PM To: Akhilesh CHANDRA Cc: 'Dunbar, Tony'; ibis@server.eda-stds.org Subject: Re: [IBIS] How we can model startup time in IBIS. Hello Akhilesh, I went through all the e-mail trail related to this subject. I believe you can use driver schedule to give the start time like this. Having only one model defined in the driver schedule and giving suitable delays needed as below. [Driver Schedule] | Model_Name Rise_on_dly Rise_off_dly Fall_on_dly Fall_off_dly |model_name 3ns X 3ns X Pls refer to the cookbook to cook this spicy! Hope this suits your need! Thanks, Anguraj Akhilesh CHANDRA wrote: >Hello Tony, > > Thanx for your reply. Initial delay is not important for SI >simulations but if it's missing in our model then it's difficult to >match spice and IBIS results also few customers use these models for >delay calculation if I don't support this startup time then customer >have only 300ps delay while in silicon it's 3.3ns. > >Regards >Akhilesh > >-----Original Message----- >From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On >Behalf Of Dunbar, Tony >Sent: Monday, May 14, 2007 10:22 PM >To: ibis@server.eda-stds.org >Subject: RE: [IBIS] How we can model startup time in IBIS. > >Hi Akhilesh, > >I've pondered this for a little while and all I can come up with is to >ask why is this an important or even relevant functional detail to be >included in a signal integrity simulation, presuming it is a signal >integrity simulation you are wanting to do? > >An "initial delay" can be incorporated into the stimulus of some SI >simulators but that is really intended to provide for driver-to-driver >skew, whereas your brief description refers to "startup". > >Regards, >Tony > >-----Original Message----- >From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On >Behalf Of Akhilesh CHANDRA >Sent: Monday, May 14, 2007 4:18 AM >To: ibis@server.eda-stds.org >Cc: Akhilesh CHANDRA >Subject: [IBIS] How we can model startup time in IBIS. > > > >Hello Experts, > > I am doing IBIS model of an IO operating at 800MHZ frequency. It have >startup time of 3nsec. After 3ns design gives output of 800mhz >frequency. If I model this time in waveform database of IBIS models the >I have over clocking issue and design is not work at this high >frequency. Can you help me to model this startup time. Is anyone make IBIS model of such designs. > >Regards >Akhilesh > > >-- >This message has been scanned for viruses and dangerous content by >MailScanner, and is believed to be clean. > >-------------------------------------------------------------------- >|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org >|with the appropriate command message(s) in the body: >| >| help >| subscribe ibis <optional e-mail address, if different> >| subscribe ibis-users <optional e-mail address, if different> >| unsubscribe ibis <optional e-mail address, if different> >| unsubscribe ibis-users <optional e-mail address, if different> >| >|or e-mail a request to ibis-request@eda-stds.org. >| >|IBIS reflector archives exist under: >| >| http://www.eda-stds.org/pub/ibis/email_archive/ Recent >| http://www.eda-stds.org/pub/ibis/users_archive/ Recent >| http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 > >-- >This message has been scanned for viruses and dangerous content by >MailScanner, and is believed to be clean. > > >-------------------------------------------------------------------- >|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org >|with the appropriate command message(s) in the body: >| >| help >| subscribe ibis <optional e-mail address, if different> >| subscribe ibis-users <optional e-mail address, if different> >| unsubscribe ibis <optional e-mail address, if different> >| unsubscribe ibis-users <optional e-mail address, if different> >| >|or e-mail a request to ibis-request@eda-stds.org. >| >|IBIS reflector archives exist under: >| >| http://www.eda-stds.org/pub/ibis/email_archive/ Recent >| http://www.eda-stds.org/pub/ibis/users_archive/ Recent >| http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 > > > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue May 15 03:31:23 2007
This archive was generated by hypermail 2.1.8 : Tue May 15 2007 - 03:32:19 PDT