[IBIS] Can I treat this circuit as a [Series Mosfet] in Ibis?

Hi Experts,

 I having some difficulty in finding the correct modeling for following
circuit structure.

                    vcc
                     _|_
                   -------
                   |      |
    core<------+     +------- pad

Although the circuitry seem to be similiar to Series elements which state
inside the cookbook, but the cookbook also mention that series mosfet syntax
is mostly use for series element between pad, Hence is it possible for me to
model the circuit as a series elements if the mosfet transistor source
connected to core, while drain connected to pad?

-- 
Best Regards,
Gooi Han Chiou

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993