Re: [IBIS] Sample ibis model for any oscillator

From: Andrew Ingraham <a.ingraham_at_.....>
Date: Fri Dec 14 2007 - 20:06:39 PST
>     Please send me the IBIS model for any
> oscillator(with any pin configuration) that is
> available with you so that i can get an idea of the
> parameters that i had to concentrate on. Please send
> me as  early as possible.

Take any IBIS model for any output pin, and there you go.

It will model an oscillator that has that kind of output buffer.  Thus, you
want to find an IBIS model for the kind of logic device used as the output
buffer in the oscillator you are looking at.

Andy



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Sat Dec 15 05:31:48 2007

This archive was generated by hypermail 2.1.8 : Sat Dec 15 2007 - 05:32:21 PST