Date: Thu Feb 14 2008 - 03:37:57 PST
Hello Experts, I have two questions on IBIS. 1. My IO cell can operate at two different voltages 3.3 and also at 1.8. We deliver two separate IBIS files for these two operating voltages. For this cell, our customer needs to use different voltages at same time, that is, some pins are using 3.3 V and some are using 1.8 V. Is it possible to mix these two files into one .ibs file ? 2. The IBIS version of library delivered by us is 2.0. Is it possible for the customer to use it in a package model whose IBIS version 4.0. ? Thanks in Advance, Best Regards Chetana -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
