RE: [IBIS] BIRD107: Update to Algorithmic Modeling API (AMI) Support in IBIS

From: Muranyi, Arpad <Arpad_Muranyi_at_.....>
Date: Thu Apr 03 2008 - 17:26:16 PDT
Excuse me, but how did the language on pg. 18 of this presentation:
http://www.vhdl.org/pub/ibis/macromodel_wip/archive/20080401/toddwesterh
off/IBIS-AMI%20Correlation%20and%20BIRD%20Update/IBIS_ATM_BIRD_Update_04
0108.pdf
change from:

| If the Reserved Parameter, Use_Init_Output, is set to "False", EDA
tools will
| use the original (unfiltered) impulse response of the channel.
| The algorithmic model is expected to modify the waveform in place.

into what is in the text of the BIRD107:

| If Use_Init_Output is set to "False", the EDA platform will present
the 
| input waveform directly to the AMI_Getwave call (i.e. without
convolving 
| the waveform with the impulse response returned by AMI_Init).

The two paragraphs have a significant difference and I didn't see
any discussion on that change...  Could someone please explain that
to me?  What happened with the "impulse response of the channel"?

Thanks,

Arpad
=====================================================================
 

-----Original Message-----
From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On
Behalf Of Mirmak, Michael
Sent: Thursday, April 03, 2008 5:09 PM
To: ibis@server.eda.org
Subject: [IBIS] BIRD107: Update to Algorithmic Modeling API (AMI)
Support in IBIS


The enclosed BIRD, "Update to Algorithmic Modeling API (AMI) Support in
IBIS," is submitted on behalf of Todd Westerhoff, SiSoft and Zhen Mu,
Cadence Design Systems.  It will be introduced and discussed at an
upcoming IBIS Open Forum teleconference.

All resolved and pending BIRDs can be found at http:// <<bird107.txt>>
www.eda.org/ibis/birds/.

- Michael Mirmak
  Intel Corp.
  Chair, IBIS Open Forum

 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Thu Apr 3 17:27:32 2008

This archive was generated by hypermail 2.1.8 : Thu Apr 03 2008 - 17:28:20 PDT