RE: [IBIS] hspice supports c_fixture ??

From: Xuefeng Chen <Xuefeng.Chen_at_.....>
Date: Sun May 11 2008 - 18:23:46 PDT
Hi Vivek,

  Hspice do support C_fixture. 

  You can contact Synopsys AC for this problem. Or sent me you ibis model and test case.

  Note this forum is not suitable for discussion of any special EDA tool.  So please just sent the case to me alone . 

Thanks,

Xuefeng 

 

 

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Vivek kumar Singh
Sent: 2008Äê5ÔÂ9ÈÕ 22:36
To: ibis@eda.org
Subject: [IBIS] hspice supports c_fixture ??

 

Experts,

 

I need your help regarding c_fixture in USB1.1 ibis model.

 

While modeling with C_fixture in my Ibis, I can¡¯t see any change in my simulation result. 

 

Could you please let me know whether hspice supports C_fixture parameter in IBIS or not? 

 

Thanks,

Vivek  


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Sun May 11 18:25:03 2008

This archive was generated by hypermail 2.1.8 : Sun May 11 2008 - 18:26:21 PDT