Hi Anders, many thanks for the clarification! Regards, Radovan -----Original Message----- From: Anders Ekholm [mailto:anders.ekholm@ericsson.com] Sent: Thursday, May 15, 2008 12:57 PM To: Vuletic Radovan (QAG PD PDE AM); Mirmak, Michael; ibis@server.eda.org Subject: RE: [IBIS] RE: BIRD109: S_overshoot_high/S_overshoot_low Clarification BIRD 109 is only tying to clarify that the S_overshoot_high/low, D_overshoot_low/high is supposed to be the limits for guaranteed function. The former description in the spec. assumes function overshoot requirements to be the same as absolute maximum rating, which will destroy the component. In some cases these two requirements (function and absolute maximun rating) will be the same and in some cases they will differ. BIRD 109 tries to make it clear that if the two requirements differ what is to be specified in the IBIS model is the function requirement. We are still separating static and dynamic overshoot. Best /Anders Ekholm -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Vuletic Radovan (QAG PD PDE AM) Sent: den 15 maj 2008 10:39 To: Mirmak, Michael; ibis@server.eda.org Subject: [IBIS] RE: BIRD109: S_overshoot_high/S_overshoot_low Clarification Hi all, I apologize on asking it on this way - but is this BIRD (BIRD 109) somehow influence the pictures on Siemens' site - explanations on S_overshoot_high/low, D_overshoot_low/high nad D_overshoot_time? (link: http://staging.siemensvdo.ibis.syzygy.de/ibis-tree/model/model-spec/ ) I mean what is really new? - I apologize on asking this so directly, perhaps someone can provide me a link where the BIRD was discussed. Many thanks, Radovan Best regards / Mit freundlichen Grüßen / S po¹tovanjem Radovan Vuletiæ Qimonda AG QAG PD PDE AM MUC/10.2.236 AP 3 Am Campeon 1-12 D-85579 Neuebiberg Germany Phone: +49 (0)89 60088 1233 Fax (PC): +49 (0)89 60088 45 5305 E-mail: radovan.vuletic@qimonda.com Web: http://www.qimonda.com/ ============================================================================== Qimonda AG Chairman of the Supervisory Board/ Aufsichtsratsvorsitzender: Peter J. Fischl Management Board/ Vorstand: Kin Wah Loh (Chairman/ Vorsitzender), Dr. Michael Majerus, Thomas J. Seifert Register Court/ Registergericht: München HRB 152545, Seat/ Sitz: München ============================================================================== -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Mirmak, Michael Sent: Thursday, May 15, 2008 4:33 AM To: ibis@server.eda.org Subject: [IBIS] BIRD109: S_overshoot_high/S_overshoot_low Clarification The enclosed BIRD, S_overshoot_high/S_overshoot_low Clarification, is submitted on behalf of Anders Ekholm of Ericsson. It will be discussed at the next IBIS Open Forum teleconference. - Michael Mirmak Intel Co <<bird109.txt>> rp. Chair, IBIS Open Forum -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu May 15 04:28:57 2008
This archive was generated by hypermail 2.1.8 : Thu May 15 2008 - 04:29:15 PDT