Shrikant, Did you look at the IBIS Cookbook to get the answer? http://www.vhdl.org/pub/ibis/cookbook/cookbook-v4.pdf I believe it is pretty well described there how you need to do this. Arpad ===================================================== -----Original Message----- From: owner-ibis@server.eda.org [mailto:owner-ibis@server.eda.org] On Behalf Of Shrikant G Kadadevar - NSBG Sent: Tuesday, September 02, 2008 6:34 AM To: ibis user; ibis Subject: [IBIS] Clarification in pullup curve Hello All, Suppose I have the separate VCC for logic level and ESD clamp ie 1.8 and 3.3. In this case when calculating the pullup/PGclamp curve, what would be the relative voltage I should consider for curve. That is my pullup curve would be VCC-V_sweep, what should be VCC? Thanks, Shrikant -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Tue Sep 2 07:46:38 2008
This archive was generated by hypermail 2.1.8 : Tue Sep 02 2008 - 07:47:33 PDT