Hello all, Thanks a lot for your timely feedback. Regards, Shantala On Tue, Apr 21, 2009 at 1:08 AM, Lynne D. Green <lgreen22@mindspring.com>wrote: > Hello, Shantala, > > There is one significant change in data interpretation between 3.2 and 4.x. > > In 3.2, it was up to the tool/user to decide how to interpret V-t tables > that did not have the same starting time. (Typically, one V-t table would > start at 0nsec and the other at 50nsec or more.) In 4.x, both tables are > assumed to start at 0nsec, no matter what the first time point in the table > is. This pushes the responsibility for "backing out" any SPICE effects on > the model maker, rather than the tool/user. > > Personally, I find it useful to set [IBIS Ver] to 4.2 for parsing, since > the additional messages can be helpful. Of course, I also parse with the > original [IBIS Ver] in the model file. > > Best regards, > Lynne > > > "IBIS training when you need it, where you need it." > > Dr. Lynne Green > Green Streak Programs > http://www.greenstreakprograms.com > 425-788-0412 > lgreen22@mindspring.com > > ------------------------------ > *From:* owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] *On > Behalf Of *shantala hegde > *Sent:* Monday, April 20, 2009 6:58 AM > *To:* ibis-users@eda.org; ibis@eda.org > *Subject:* [IBIS-Users] IBIS version 4.2 > > Hi all, > > Does IBIS ver 4.2 supports models generated with 3.2.What are the extra > feauters with 4.2 version. > > For example, if I have generated the model with 3.2 version and later if I > change the version to 4.2, will it be compatiable with 4.2 checks. > > To what extent will it affect the end users. > > Please let me know on this. > > Thanks, > Shantala > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993Received on Thu Apr 23 10:15:21 2009
This archive was generated by hypermail 2.1.8 : Thu Apr 23 2009 - 10:17:26 PDT