Hi Gowtham, I am adding little more information to Scott. Find some more information at IBIS forum discussion mail archive. Details of the mail chain is Subject: [IBIS] input signal for model usage. DATE : Wed 3/18/2009 (around) There are some discussion in IBIS quality group also. I have attached a file containing the discussion in IBIS quality group meetings. This contain the different quality aspects to be taken care while shrinking the VT window. You can find the same file in the IBIS quality discussion archive at http://www.vhdl.org/pub/ibis/quality_wip/ with regards, Muniswara Reddy . V Design engineer, PIPD-IO group, Bangalore. -----Original Message----- From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Scott McMorrow Sent: Monday, May 18, 2009 8:47 PM To: g-m@ti.com Cc: ibis-users@eda.org; ibis@eda.org Subject: Re: [IBIS-Users] Simulating IBIS at the maximum frequency Gowtham Since time is relative in IBIS model simulations, what you do is to normalize the V/T table timing, by shifting the slower corner curves back towards zero. Essentially, you remove any leading static values from the curves, prior to the edge transitions. Scott Gowtham M wrote: > Hello, > > How do we ensure that IBIS model can be correctly simulated at the > highest possible frequency? Suppose, I have a buffer which is expected > to work at 100MHz. Hence, the VT table should be at most 1 / ( 2 * > 100M ) = 5ns wide. > > If the buffer is designed such that it can just meet this requirement > in min (slow) corner. The problem that I am facing is that I cannot > represent all of typ/min/max transitions within this window of 5ns > because of variations in buffer delay across corners. > > How do I create an IBIS model that can be correctly simulated at > 100MHz in such cases? > > Thanks for your help. > > Gowtham > -- Scott McMorrow Teraspeed Consulting Group LLC 121 North River Drive Narragansett, RI 02882 (401) 284-1827 Business (401) 284-1840 Fax http://www.teraspeed.com Teraspeed(r) is the registered service mark of Teraspeed Consulting Group LLC -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993 -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org |with the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or e-mail a request to ibis-request@eda-stds.org. | |IBIS reflector archives exist under: | | http://www.eda-stds.org/pub/ibis/email_archive/ Recent | http://www.eda-stds.org/pub/ibis/users_archive/ Recent | http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Mon May 18 2009 - 20:42:35 PDT