Re: [IBIS] The roll of IBIS, Model Maker, EDA Tool, and Model User

From: Scott McMorrow <scott@teraspeed.com>
Date: Sat Apr 09 2011 - 10:46:46 PDT

Ergo quid?

On Sat, Apr 9, 2011 at 1:42 PM, Walter Katz <wkatz@sisoft.com> wrote:

> All,
>
>
>
> When a User wants an EDA Tool to do an analysis using any models the User
> does the following:
>
>
>
> 1. The User reads the Models Owner’s Manual
>
> 2. The User understands the channel that this model is going to work
> in
>
> 3. The User decides how to set up simulations based on the channels
> operating conditions and the Models Owner’s Manual.
>
> 4. The Model Owner’s Manual needs to explain to the User what the
> models can do, what its inputs are and what its outputs are. The model has
> to explain to the User how to set the inputs to the model, and the model has
> to explain to the User how to use the outputs of the model.
>
> 5. The User decides how he wants the outputs of the model to be
> used.
>
>
>
> In order for the User to be able to do this:
>
> 1. IBIS is responsible for setting a standard for Model Makers to
> define the capabilities, inputs and outputs of their models.
>
> 2. The Model Maker is responsible defining the capabilities, inputs
> and outputs of his model, and to do that according to the standard set by
> IBIS. The Model Owner’s Manual needs to explain to the User what the models
> can do, what assumptions it is making about its operating environment, what
> its inputs are and what its outputs are. The Model Owner’s Manual has to
> explain to the User how to set the inputs to the model.
>
> 3. The EDA Tool is responsible for enabling the User to implement
> how the User wants to do an analysis and how the user wants to use the
> outputs of an analysis,.
>
>
>
> This applies to AMI Models, IBIS Models, ISS Models, Verilog Models, VHDL
> Models.
>
>
>
> I do not know how it can be any other way.
>
>
>
> Walter
>
>
>
> Walter Katz
>
> wkatz@sisoft.com
>
> Phone 303.449-2308
>
> Mobile 720.333-1107
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>

-- 
Scott McMorrow
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
(401) 284-1827 Business
(401) 284-1840 Fax
http://www.teraspeed.com
Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Sat Apr 9 10:47:07 2011

This archive was generated by hypermail 2.1.8 : Sat Apr 09 2011 - 10:47:09 PDT