[IBIS] RE: BIRD127.4: IBIS-AMI Typographical Corrections CORRECTED

Hello,
I have an AMI (attached) file for a RX that does not require any Model Specific parameter. Because, it is a self contained adaptive RX. So I left out the Model Specific parameter section. I have one simulator works with this model as expected. Two other simulators are having problem with this omission.

bird127.4 states -
"
|* ending with parentheses. The file may also contain another
|* section or sub-tree named 'Model_Specific', beginning and
|* ending with parentheses.
"
I read that as 'Model_Specitic' parameter section is optional.

Could you help me with clarification?

Sincerely,
Mahbubul Bari
Office: +1 (719) 278-2068
Maxim Integrated Products | Innovation Delivered(r) | www.maxim-ic.com<http://www.maxim-ic.com>

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mirmak, Michael
Sent: Thursday, November 03, 2011 9:30 AM
To: 'ibis@server.eda.org'
Subject: [IBIS] BIRD127.4: IBIS-AMI Typographical Corrections CORRECTED

(ironically enough, an incorrect version of the revised BIRD127.4 was sent out earlier; the corrected version is enclosed and is posted to the website)

The enclosed revised BIRD 127.4, IBIS-AMI Typographical Corrections, is posted on behalf of Arpad Muranyi of Mentor Graphics, Inc. It will be discussed at the next IBIS Open Forum teleconference.

A complete list of BIRDs and BIRD status updates is available at http://www.eda.org/ibis/birds/.

Michael Mirmak
Intel Corp.
Chair, IBIS Open Forum

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda-stds.org/pub/ibis/email_archive/ Recent
| http://www.eda-stds.org/pub/ibis/users_archive/ Recent
| http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993