Vinayak,
One way to switch between a model that includes the termination and one that does not is to use the [Model Selector] keyword. You can create two unique [Model]s and let the user choose which model they want - one with the termination or one without.
Regards,
Randy
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi, Arpad
Sent: Thursday, August 16, 2012 7:49 AM
To: ibis@eda.org
Subject: [IBIS] RE: Using submodels
Vinyak,
The simulator is correct. As the name also implies,
[Add Submodel] is added to the main [Model]. If you
read Section 6a in the v5.0 specification, starting
on pg. 83, you will notice that it says "added
functionality" or similar all over the place.
Thanks,
Arpad
======================================================
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Ghatawade, Vinayak
Sent: Thursday, August 16, 2012 4:12 AM
To: ibis@eda.org
Subject: [IBIS] Using submodels
Hi IBIS experts,
I was modeling some termination (switchable : off/on) as submodel and I ran the this model into hspice QC to check how this behaves.
What I capture as part of submodel are weak pullup ON + diode IV as pwr/gnd clamp and base model where I call this also has diode IV in pwr/.gnd clamps.
When I run QC I find that the currents are double counted.
My interpretation was that the submodel pwr/gnd clamp should replace the base model pwr/gnd clamp tables in Receive mode which I expected to.
This looks not to be the case. Is my understanding wrong. Does submodel gets added to base model?
Is there any way tools can switch to submodel currents only and not add to base model IV ?
Thanks
Vinayak
-- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Thu Aug 16 12:42:04 2012
This archive was generated by hypermail 2.1.8 : Thu Aug 16 2012 - 12:42:46 PDT