[IBIS] FW: question about the [Composite Current] table

Hi IBIS experts,

How about this question ?

Regards,
Ryohei Kato

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Ryohei Kato
Sent: Tuesday, August 28, 2012 12:05 PM
To: ibis@eda.org
Subject: [IBIS] question about the [Composite Current] table

Hi IBIS experts,

I have the basic question about the [Composite Current] table of IBIS5 model.

The ibis5.1 syntax explains the [Composite Current] as follows.

Keyword: [Composite Current]

Required: No
Description: Describes the shape of the rising and falling edge current waveforms from the power reference terminal of the buffer.

And the circuit image is attached file.

So I understood as follows.

The ibis5 model can consider the Bounce of V(vdd,vss) because of the current "vdd -> pch -> R_fix -> gnd".
But the ibis5 model CAN'T consider the Bounce of V(vdd,vss) because of the current "V_fix -> R_fix -> nch -> gnd".

Is my understanding correct ?

Regards,
Ryohei Kato

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
| http://www.eda-stds.org/ibis/email_archive/ Recent
| http://www.eda-stds.org/ibis/users_archive/ Recent
| http://www.eda-stds.org/ibis/email/ E-mail since 1993