Thank you Arpad , for have clarified my question. Regards, Fabio From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Muranyi, Arpad Sent: Monday, November 26, 2012 5:49 AM To: ibis@eda.org; ibis-users@eda.org Subject: RE: [IBIS] Valid Matrices Fabio, That is currently correct for the IBIS package and EBD models. For the IBIS-ISS specification you can have everything that is supported by the W-element or S-parameter models. We are now working very hard to make IBIS-ISS available for IBIS package and on-die interconnect modeling. I hope this helps, Arpad =============================================================== From: owner-ibis@eda.org<mailto:owner-ibis@eda.org> [mailto:owner-ibis@eda.org] On Behalf Of Fabio BRINA Sent: Thursday, November 22, 2012 3:20 AM To: ibis@eda.org<mailto:ibis@eda.org>; ibis-users@eda.org<mailto:ibis-users@eda.org> Subject: [IBIS] Valid Matrices Hello Experts, In the IBIS Manual I read only about [Resistance Matrix], [Inductance Matrix] and [Capacitance Matrix]. Are only these valid Matrices? Is [Conductance Matrix] an invalid Matrix for the IBIS standard? Thank you in advance, Regards, Fabio -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------------------------------------------------------------- |For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org |or ibis-request@eda-stds.org | |IBIS reflector archives exist under: | | http://www.eda-stds.org/ibis/email_archive/ Recent | http://www.eda-stds.org/ibis/users_archive/ Recent | http://www.eda-stds.org/ibis/email/ E-mail since 1993Received on Tue Nov 27 00:49:07 2012
This archive was generated by hypermail 2.1.8 : Tue Nov 27 2012 - 00:52:12 PST