RE: [IBIS] BIRD167: Add Type Float to Tx Jitter Parameters in Specification Tables

From: Bob Ross <bob@teraspeed.com>
Date: Tue Apr 22 2014 - 13:55:02 PDT
Michael:

 

Thanks for writing BIRD167.

 

We should amend BIRD167 to include another editorial correction.

 

In Table 31, the superscript 2 should be removed for Ignore_Bits.

 

Bob

 

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mirmak,
Michael
Sent: Tuesday, April 22, 2014 12:22 PM
To: ibis@eda.org
Subject: [IBIS] BIRD167: Add Type Float to Tx Jitter Parameters in
Specification Tables

 

The BIRD linked below, Add Type Float to Tx Jitter Parameters in
Specification Tables, is submitted for consideration by the IBIS Open Forum.
It will be introduced at the next IBIS teleconference.

 

http://www.eda.org/ibis/birds/bird167.docx 

 

A complete list of BIRDs is available at http://www.eda.org/ibis/birds/.

 

Michael Mirmak

Intel Corp.

Chair, IBIS Open Forum

 

 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Tue Apr 22 13:55:30 2014

This archive was generated by hypermail 2.1.8 : Tue Apr 22 2014 - 13:55:53 PDT