[IBIS] RE: BIRD173: Package RLC Matrix Diagonals

Randy,

I discussed this BIRD with my colleagues at Mentor, and we strongly feel
that the text of the BIRD (and consequently the specification) should
include the additional rules Vladimir mentioned to you in his comments
earlier.

If we (IBIS) feel that the IBIS parser should not be over burdened by
having to check the content of the model against all those rules, we
could state in the text that the parser will only check such and such,
but we (Mentor) feel that all the rules that make a correct model should
be spelled out in the specification.

Please consider adding the necessary test to describe them.

Thanks,

Arpad
===========================================================================

From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mirmak, Michael
Sent: Wednesday, July 16, 2014 5:37 PM
To: ibis@eda.org
Subject: [IBIS] BIRD173: Package RLC Matrix Diagonals

BIRD173, Package RLC Matrix Diagonals, is submitted on behalf of Randy Wolff of Micron Technology.  It will be introduced at the next IBIS Open Forum teleconference.  The BIRD text is available at:

http://www.eda.org/ibis/birds/bird173.docx

A complete list of BIRDs can be found at:

http://www.eda.org/ibis/birds/

Michael Mirmak
Intel Corp.
Chair, IBIS Open Forum
http://www.eda.org/ibis/


--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993