[IBIS] RE: [IBIS-Users] Re: Regarding IBIS Validation

Hi Abhishek,

Do you mean be viewing the waveform?

If Yes, then there Hyperlynx visual ibis editor where you can view the V-t data.

If your question is related to validating this Vt data then there are commercially available tools like T2B , IOMeth etc which run spice simulations to verify the  accuracy of the tabulated data in IBIS file.

Regards
Chethan

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of abhishek goswami
Sent: Wednesday, October 15, 2014 1:36 PM
To: ibis@eda.org; ibis-users@eda.org; si-list@freelists.org
Subject: [IBIS-Users] Re: Regarding IBIS Validation

<sending again As did not message>


Hi All,
I am not very expert in IBIS modelling and have very small query. In our system, we have tool which generate IBIS file and contain information about rise and fall waveform. In current scenario, I have to change r_fixture value and need to generate IBIS file. I am able to generate IBIS file and contain all data points. I want to very all data points which is present in IBIS file. Is there any tool/mythology available to  verify IBIS data points. I have run ibischk5 and did not get any error. In brief, I want to verify all points
in IBIS.

Thanks
Abhishek Goswami
Phone No -07829580867/9962270999
Skype : abhishekgoswami1



--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993