[IBIS-Users] using an ibis model


Subject: [IBIS-Users] using an ibis model
From: Angulo, John (john_angulo@mentorg.com)
Date: Thu Sep 26 2002 - 17:15:46 PDT


The following is posted on behalf of Yoni Tzafrir at Siliquent Technologies. Please send all private replies to yonitz@siliquent.com only.

-------------------------------
hi,
i'm using an input/output ibis model buffer, in my Hspice simulation.
from my netlist:

b_output nd_pu nd_pd out in en v_out_of_in
+ file='filname.ibs'
+ model='modelname'

and i've connected the in node to my netlist as a reciever, and it seems to
work well.

but looking at the ibis file i am seeing:

Pin] signal_name model_name R_pin L_pin C_pin
  1 PAD bsstl2c2_a NA NA NA

1. what does it mean, does the buffer has one pin only?
2. which one is it (the in-pin the out-pin the v_out_of_in)?
3. if the answer to the first question is yes, so how do i connect this pin
to my circuit in the netlist?

please ansewr, the Hspice user-guide is not clear on this issue
yoni.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Sep 26 2002 - 17:29:20 PDT