Subject: [IBIS-Users] 5V tollerant pad
From: garry.felker@conexant.com
Date: Tue Jan 28 2003 - 08:52:25 PST
Hi all,
I have a 3.3V I/O pad that is 5V tollerant. I would like to include Rising
and Falling waveform data with voltage rails at 3.6 and 5.5 V.
Is there a way to include both of these conditions in the IBIS model?
Garry Felker
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Jan 28 2003 - 09:04:31 PST