Subject: Re: [IBIS-Users] ERROR in IBIS model
From: Anshuli Goel (anshuli@india.ti.com)
Date: Tue Feb 18 2003 - 18:55:43 PST
Hi Experts
You know what , the suggestions that you made are working out fine , the
errors have disappeared.
Tom ,thanx for sending me the corrected IBIS model.
John . I generated the model at 50 ohms only. I was doing something so I
had changed the value in control file.
I was using s2ibis2 to generate the model so I did not bother to check
each and every coulmn. I thought them to be ok. From now on I will be
checking all the curves in file.
Thanx a lot once again.
Regards
Anshuli
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Feb 18 2003 - 19:04:29 PST