Subject: RE: [IBIS-Users] IBIS Temperature range
From: Mike LaBonte (milabont@cisco.com)
Date: Wed Aug 13 2003 - 10:59:41 PDT
In theory an IBIS model produced for one supply voltage works over a range
of supply voltages. In practice, you will probably find that producing the
same model using s2ibis2 with different supply voltages yields different
models. I prefer not to use an IBIS model at any voltage other than the one
it was produced for.
Mike LaBonte
-----Original Message-----
From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org]On
Behalf Of Gavin Cosgrave
Sent: Wednesday, August 13, 2003 10:09 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] IBIS Temperature range
Hi all,
I am generating an IBIS model for a part with a Vdd spec of
2.5 to 5.5 Volts. My question is whether I should generate two IBIS
models, one with Voltage Range 4.5, 5, 5.5, and the other with 2.5,
2.7, 3?
The reason I ask is that if someone is using a Vdd=5V system,
and if I extract the model with voltage range 2.5, 5, 5.5, the min
will be well below anything they ever see.
Apologies if this question has already been answered, but I
can't find anything in the archive.
Thanks,
Gavin.
-- Gavin Cosgrave, Analog Devices, Building 2200, Cork Airport Business Park, Cork, Ireland. Tel:+353-21-4917906 Internal:6021-7906 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Aug 13 2003 - 11:03:52 PDT