Subject: [IBIS-Users] Determination of Ccomp with input network
From: erik.van.der.ven@philips.com
Date: Mon Oct 06 2003 - 04:22:06 PDT
Hello IBIS expert,
I want to determine a value for Ccomp for a differential LVDS input.
When I "look" into the input terminals I see a network of resistors and
capacitors in front of the input transistors. There are also series
resistors present and thus there is capacitance at both sides of these
resistors. How should I determine Ccomp? Will this be a good
representation of the load behaviour?
With kind regards,
Ir. Erik van der Ven
Room DB1032
Business Line Networking Infrastructure
Philips Semiconductors BV
Gerstweg 2
6534 AE Nijmegen
The Netherlands
Phone: +31-24-3534334
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Mon Oct 06 2003 - 04:27:39 PDT