[IBIS-Users] Re: [IBIS] Mult-Lingual Model Support in IBIS

Hello Shulong:

In IBIS Version 4.1, there is no direct method to connect the
die pads to pins listed below. As you discovered, there is no
reference through [Circuit Call]s for such a connection. So at
this time the EDA tool would have to provide the connection outside
of the IBIS syntax.

However, solutions are being discussed and should lead to a
proposal for IBIS Version 4.2. The proposals will probably involve
some linkage syntax involving IBIS and the Interconnect Model Specification
(ICM) for a more general package model.

Regards,
Bob

slwu wrote:

> Hi,
>
> I am still not very clear...so giving an exact example may be more
> understood for me.
> In the diagram on Page 112 of the IBIS 4.1 specification, there are several
>
> connections between die pads and pins that I can not understand how they
> are constructed through [Circuit Call]s on Page 113~114
> 1. "pad_11" <====> "11"
> 2. "pad_2a"/"pad_2b" <====> "2"
> 3. "pad_4" <===> "4a" /"4b"
>
> Thanks very much
> slwu
>

-- 
Bob Ross
Teraspeed Consulting Group LLC     Teraspeed Labs
121 North River Drive              13610 SW Harness Lane
Narragansett, RI 02882             Beaverton, OR 97008
503-750-6481                       503-430-1065
http://www.teraspeed.com           503-246-8048 Direct
bob@teraspeed.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993