[IBIS-Users] RE: [IBIS] Warnings in GPIO pad ibis file with ibischk3

Hello, Mithlesh ,

Please use the latest ibischk4 version from the IBIS web site.  If you are
modeling a differential buffer, these messages might still occur.  

Please feel free to send your model for review to the IBIS Model Review
Committee (put Model for Review in the subject).

Best regards,
Lynne Green, Chair, IBIS Model Review Committee

"IBIS training when you need it, where you need it."

Dr. Lynne Green
Green Streak Programs
http://www.greenstreakprograms.com
lgreen22@mindspring.com



-----Original Message-----
From: owner-ibis@eda.org [mailto:owner-ibis@eda.org] On Behalf Of Mithlesh
Shrivas
Sent: Monday, February 14, 2005 8:57 PM
To: ibis@eda.org
Cc: ibis-users@eda.org
Subject: [IBIS] Warnings in GPIO pad ibis file with ibischk3

Hi Experts,
                    While checking the quality of .ibs file with 
ibischk3 , I'm encountering following warnings. The I/O pad is general 
purpose.
 <snipped to end>


|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993