[IBIS-Users] Max and min condition simulations

From: lee yang <changly_80_at_.....>
Date: Tue Mar 15 2005 - 06:06:11 PST
Hi all,

1) In the IBIS file, the R_pin, L_pin and C_pin are  not divided into typ, 
min and max, does this mean that regardless of the simulation conditions 
(min, typ or max), the same R_pin, L_pin and C_pin are used? In practical, 
woudn't these values are changing at different conditions?

2) Which C_comp value among min, typ and max will be selected by simulator 
to do the max (fast)condition simulation? is it the smallest C_comp is used? 
How about the package RLC?

Many thanks.

-Lee

_________________________________________________________________
Get an advanced look at the new version of MSN Messenger. 
http://messenger.msn.com.my/Beta/Default.aspx

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Tue Mar 15 06:06:14 2005

This archive was generated by hypermail 2.1.8 : Tue Mar 15 2005 - 06:08:06 PST